CLUTCH RELEASE CYLINDER

H-12prose procedure

PREPARATION

SST

Part Number	Name	Usage
49 0259 770B	Wrench, flare nut	For disconnecting and connecting clutch pipe

49 0259 770B

NameWrench, flare nut

UsageFor disconnecting and connecting clutch pipe

REMOVAL / INSTALLATION

CAUTION

Clutch fluid will damage painted surfaces. Be sure to use a container or rags to collect it. If fluid does get on a painted surface, wipe it off immediately with a rag.

Clutch Release Cylinder Removal / Installation

1
Remove in the order shown in the figure, referring to Removal Note.
05U0HX-016
2
Install in the reverse order of removal, referring to Installation Note.

Parts DiagramFig. fig2

#	Part Name	Notes
1	Clutch pipe	Removal Note ........................... page H-12; Installation Note........................ page H-13; Tightening torque 13—22 N·m (1.3—2.2 m-kg, 9.4—16 ft-lb) with SST
2	Bolt	Tightening torque 16—23 N·m (1.6—2.3 m-kg, 12—17 ft-lb)
3	Clutch release cylinder	Remove boot and check for fluid leakage; Overhaul.................. page H-13

Removal Note

Clutch pipe

CAUTION

After disconnecting the clutch pipe, plug it to prevent fluid leakage.

Disconnect the clutch pipe with the SST.

Support our work!