FRONT SUSPENSION (DOUBLE-WISHBONE) - STABILIZER

R-19prose procedure

STABILIZER

1
Jack up the front of the vehicle and support it with safety stands.
2
Remove the undercover.
3
Remove in the order shown in the figure.
05U0RX-044
4
Inspect all parts and repair or replace as necessary.
5
Install in the reverse order of removal, referring to Installation Note.
6
Tighten all nuts and bolts to the specified torques, referring to the figure.
Loosely tighten the stabilizer control link and bracket bolts. Lower the vehicle and tighten all nuts and bolts to the specified torques with the vehicle unladed.

Specification	Value
Stabilizer bracket bolt (1)1.8-2.7 m-kg, 13-20 ft-lb	≈18 - 26N·m
Stabilizer control link bolt (4)3.7-5.5 m-kg, 27-40 ft-lb	≈36 - 54N·m

Stabilizer bracket bolt (1)1.8-2.7 m-kg, 13-20 ft-lb

18 - 26N·m

Stabilizer control link bolt (4)3.7-5.5 m-kg, 27-40 ft-lb

36 - 54N·m

Parts DiagramFig. fig1

#	Part Name	Notes
1	Stabilizer bracket	—
2	Stabilizer bushing	Inspect for deterioration and wear; Installation Note .......... below
3	Stabilizer	Inspect for bending and damage
4	Stabilizer control link	Inspect for bending and damage

Align the bushing with the installation mark on the stabilizer.