WINDSHIELD WIPER AND WASHER — Adjustment
S-36prose procedureAdjustment
Arm height
Set the arm height as shown.
| Specification | Value |
|---|---|
| Wiper arm height from molding edge (both arms) | 30 ± 5mm (1.18 ± 0.20 in) |
Wiper arm height from molding edge (both arms)
30 ± 5mm (1.18 ± 0.20 in)
Washer nozzle
Insert a needle or similar object into the nozzle hole and move the nozzle to adjust the spray direction.
| Specification | Value |
|---|---|
| Spray target — horizontal distance from CENTER (nearest left/right targets)passenger side / driver side near | 187 / 129mm (7.36 / 5.08 in) |
| Spray target — horizontal distance from CENTER (outer left/right targets) | 200 / 220mm (7.87 / 8.66 in) |
| Spray target — vertical distance from molding edge (upper) | 274 / 250mm (10.79 / 9.84 in) |
| Spray target — vertical distance from molding edge (lower) | 200 / 158mm (7.87 / 6.22 in) |
| Spray target box size | 30 × 30mm (1.18 × 1.18 in) |
| Spray target inset spacing | 20 / 20mm (0.79 / 0.79 in) |
Spray target — horizontal distance from CENTER (nearest left/right targets)passenger side / driver side near
187 / 129mm (7.36 / 5.08 in)
Spray target — horizontal distance from CENTER (outer left/right targets)
200 / 220mm (7.87 / 8.66 in)
Spray target — vertical distance from molding edge (upper)
274 / 250mm (10.79 / 9.84 in)
Spray target — vertical distance from molding edge (lower)
200 / 158mm (7.87 / 6.22 in)
Spray target box size
30 × 30mm (1.18 × 1.18 in)
Spray target inset spacing
20 / 20mm (0.79 / 0.79 in)