Mazda MX-5 NA silhouetteMX-5 NA

DOOR

S-7parts diagram

COMPONENTS

Removal / Installation

Door Removal / Installation

  1. 1
    Disconnect the negative battery cable.
  2. 2
    Remove in the order shown in the figure.
    Exploded view of the MX-5 door assembly with three circular detail insets showing: harness connector (callout 1, top), checker pin and checker mechanism (callouts 2 and 5, middle) with torque 8.8-13 N·m (0.9-1.3 m-kg, 6.5-9.4 ft-lb), and hinge (callout 3, bottom) with torque 22-30 N·m (2.2-3.1 m-kg, 16-22 ft-lb). The door (callout 4) is shown attached to body.
    05U0SX-007
  3. 3
    Install in the reverse order of removal.
    Remove the trim and door screen for removal of the door checker. (Refer to page S-9.)
    Adjust the door lock striker. (Refer to page S-8.)
Parts DiagramFig. fig1
#Part NameNotes
1Harness connector—
2Checker pin—
3Hinge—
4DoorAdjustment ....... page S-8
5Checker—
Tightening torque (checker)
8.8 - 13N·m
Tightening torque (hinge)
22 - 30N·m
Support our work!

See also

Section TS-9WINDOW REGULATOR, GLASS, AND GUIDE

Search Manual

Search pages, specs, and procedures