AIR CONDITIONER

U-40prose procedure

COMPRESSOR

Removal / Installation

Compressor Removal / Installation

1
Raise the front of the vehicle at least 300mm (11.8 in) and support it with safety stands.
2
Discharge the refrigerant system. (Refer to page U-28.)
3
Remove the splash shield and air guide.
4
Remove the compressor as shown in the figure, referring to Removal Note.
05U0UX-072
5
Install the compressor in the reverse order of removal, referring to Installation Note.
6
Install the air guide and splash shield.
7
Charge the refrigerant system. (Refer to page U-29.)

Parts DiagramFig. fig1

#	Part Name	Notes
1	Suction hose	—
2	Discharge hose	—
3	Compressor	—

Removal note

NOTE

Immediately plug any open fittings to keep moisture out of the system.

Installation note

NOTE

Apply clean compressor oil to the O-rings before connecting the fittings. Do not apply compressor oil to the fitting nuts. Adjust the belt tension to specification. (Refer to page U-43.)

Tightening torque

Specification	Value
Compressor inlet and outlet	9.8 - 16N·m
Compressor mounting bolt	14.7 - 21.6N·m

Compressor inlet and outlet

9.8 - 16N·m

Compressor mounting bolt

14.7 - 21.6N·m

Support our work!