INTAKE AIR SYSTEM
F-92parts diagramCOMPONENTS
Removal / Inspection / Installation
WARNING
Before removing the intake manifold, release the fuel pressure from the fuel system to reduce the possibility of injury or fire. (Refer to page F-101.)
NOTE
Before disconnecting the water hoses, drain the engine coolant.
Use new gaskets during reassembly.
Removal / Inspection / Installation
- 1Remove in the order shown in the figure.
05U0FX-105 - 2Check the components for damage and repair or replace as necessary.
- 3Install in the reverse order of removal.
Parts DiagramFig. fig1
| Specification | Value |
|---|---|
| Tightening torque (callout top, multiple) | ≈76 - 108N·m |
| ≈27 - 39N·m |
Tightening torque (callout top, multiple)
76 - 108N·m
27 - 39N·m