ENGINE TUNE-UP PROCEDURE
B-7prose procedure(3) A/C belt
- 1If necessary, loosen the locknut and adjust the belt deflection by turning the adjusting bolt.
05U0BX-015
| Specification | Value |
|---|---|
| Tightening torque (A/C belt) | 37 - 52N·m |
Tightening torque (A/C belt)
37 - 52N·m
HLA
HLA Troubleshooting
1. Tappet noise occurs when engine started immediately after engine oil replacement
Possible CauseNo oil in HLA
RemedyTappet noise should dissipate from within a few seconds to ten minutes
2. Tappet noise occurs when engine started after setting more than one day
Possible CauseNo oil in HLA
RemedyTappet noise should dissipate from within a few seconds to ten minutes
3. Tappet noise occurs when engine started after cranking by starter more than three seconds
Possible CauseNo oil in HLA
RemedyTappet noise should dissipate from within a few seconds to ten minutes
4. Tappet noise occurs when engine started after HLA replaced
Possible CauseNo oil in HLA
RemedyTappet noise should dissipate from within a few seconds to ten minutes
5. Tappet noise continues more than ten minutes
Possible CauseLow oil pressure
RemedyCheck oil pressure (Refer to Section D)
5. Tappet noise continues more than ten minutes
Possible CauseDefective HLA
RemedyInspect HLA (Refer to page B-54)
6. Tappet noise occurs at idle after high-speed driving
Possible CauseLow oil level
RemedyAdd engine oil
6. Tappet noise occurs at idle after high-speed driving
Possible CauseDegenerated oil
RemedyReplace engine oil
