TIMING BELT — Removal / Installation
B-12parts diagramP/S and/or A/C equipped variants share the same belt-removal sequence.
Removal / Installation
CAUTION
Obtain the code number and deactivate the audio anti-theft system before disconnecting the battery. (Refer to page T-113.)
Position the hose clamp in the original location on the hose, and squeeze the clamp lightly with large pliers to ensure a good fit.
Removal / Installation
- 1Disconnect the negative battery cable.
- 2Drain the engine coolant.
- 3Remove in the order shown in the figure, referring to Removal Note.
05U0BX-023 - 4Install in the reverse order of removal, referring to Installation Note.
Parts DiagramFig. fig1
| Specification | Value |
|---|---|
| Tightening torque (item A near coil) | 19 - 25N·m |
| Tightening torque (item B spark plug) | 15 - 23N·m |
| Tightening torque (cylinder head cover) | 4.9 - 8.8N·m |
| Tightening torque (timing belt covers) | 7.8 - 11N·m |
| Tightening torque (idler/tensioner area) | 37 - 52N·m |
| Tightening torque (water pump area) | 7.8 - 11N·m |
| Tightening torque (lower bracket) | 12 - 17N·m |
Tightening torque (item A near coil)
19 - 25N·m
Tightening torque (item B spark plug)
15 - 23N·m
Tightening torque (cylinder head cover)
4.9 - 8.8N·m
Tightening torque (timing belt covers)
7.8 - 11N·m
Tightening torque (idler/tensioner area)
37 - 52N·m
Tightening torque (water pump area)
7.8 - 11N·m
Tightening torque (lower bracket)
12 - 17N·m